STP Phase 2: Small Business Compliance | Coleman Financial

Single Touch Payroll Phase 2 Compliance for Australian Small Businesses

Every pay run now tells the ATO far more than what you paid. Your payroll software reports how each dollar was earned, whether each employee is full-time, part-time, or casual, and, since 1 July 2026, the earnings used to calculate their super.

That detail is the heart of STP Phase 2. When a pay item sits in the wrong category, the error doesn’t stay in your payroll file. It flows into your employees’ income statements, the data shared with Services Australia, and the ATO’s super compliance checks.

This guide explains what STP Phase 2 requires, what changed in the 2026-27 financial year, the reporting options open to small employers, and what to check in your payroll settings now.

STP Phase 2 at a Glance

The short answer: STP Phase 2 requires employers to report itemised pay, employment, and tax details to the ATO by each payday. From 1 July 2026, that report must also carry each employee’s qualifying earnings and super liability.

Requirement

What it means for employers

Key date

Report through STP-enabled software

Send payroll data to the ATO on or before each payday

Ongoing

Itemise gross pay

Report paid leave, allowances, overtime, bonuses and commissions, directors’ fees, lump sum W, and salary sacrifice separately

Since 1 January 2022

Report qualifying earnings and super liability

Include year-to-date amounts for each employee every payday

From 1 July 2026; reports missing either amount are rejected from 1 July 2027

Reclassify award transport payments

Withhold tax and report these allowances under a standard allowance type

From 1 October 2026; zeroing out method available until 31 December 2026

Make a finalisation declaration

Confirm each employee’s data is complete for the financial year

14 July for arm’s length employees

What Is STP Phase 2?

Single Touch Payroll (STP) sends tax and super information from your payroll or accounting software to the ATO each time you pay your employees. STP Phase 2 is the expanded version of that reporting, which started on 1 January 2022.

Instead of one gross figure, Phase 2 asks for the components behind it, plus details such as each employee’s employment basis and the reason they leave. The ATO shares this information with Services Australia, which uses it when its customers report employment income.

For employees, the result appears in myGov as an income statement. Once you finalise your STP data, you don’t need to issue payment summaries for the amounts you reported.

Which Businesses Need to Report Through STP Phase 2?

The short answer: if you pay employees, you report through STP. The ATO’s transition period has ended, so this applies to employers of every size unless a specific deferral or exemption applies.

Your situation

Do you report through STP?

You pay employees

Yes, on or before each payday

You pay closely held payees, such as family members, directors, shareholders, or trust beneficiaries

Yes, though small employers can report them quarterly (covered below)

You’re hiring your first employee

Yes, from your first pay run

You’re a sole trader with no employees

Generally no, because drawings aren’t wages

Hiring for the first time? Build STP into your accounting set-up for startups alongside registrations and bookkeeping.

What Changed Under STP Phase 2?

Phase 2 changed what each pay event contains, not how or when you lodge it. Four changes matter most for small employers.

1. Gross Pay Is Reported in Separate Components

Under Phase 1, most earnings sat in a single gross amount. Phase 2 requires you to separate that figure into the components set out in the ATO’s STP guidance on disaggregation of gross.

Component

What it generally includes

Gross

Ordinary hours, casual loading, and shift penalties

Paid leave

Annual leave and leave loading, long service leave, personal leave, parental leave, workers’ compensation, and leave cashed out

Allowances

Each allowance reported against its allowance type

Overtime

Overtime worked, call-back payments, and on-call allowances paid outside normal hours

Bonuses and commissions

Christmas, sign-on, retention, and performance bonuses, plus commissions

Directors’ fees

Fees paid to working and non-working directors

Lump sum W

Return-to-work payments, such as a payment to end industrial action

Salary sacrifice

Sacrificed amounts reported separately, with gross shown before the sacrifice

The category matters. Shift penalties stay in gross, while leave loading clearly linked to a loss of overtime is reported as overtime. Salary sacrifice is another common sticking point because Phase 2 uses pre-sacrifice amounts, while Phase 1 used post-sacrifice figures.

2. Employment and Tax Details Replace TFN Declaration Lodgement

Each pay event now includes your employee’s employment basis, such as full-time (F), part-time (P), or casual (C), and a 6-character tax treatment code. Your software generates the code from the employee’s tax file number (TFN) declaration and any withholding declaration.

Because this information travels with STP, you no longer need to send TFN declarations to the ATO. Employees still complete them, and you still keep them on file.

These details must stay current. If an employee moves from casual to part-time, update their employment basis even if they haven’t given you a new TFN declaration.

3. Cessation Reasons Are Reported When Staff Leave

When an employee leaves, your STP report includes the cessation date and a reason code, which reduces the need to issue an employment separation certificate. The available reasons are:

  • Voluntary cessation (V): resignation, retirement, or abandonment of employment
  • Ill health (I): leaving because a medical condition prevents continued employment
  • Deceased (D): the death of an employee
  • Redundancy (R): employer-initiated termination due to redundancy or an approved early retirement scheme
  • Dismissal (F): employer-initiated termination for misconduct, inefficiency, or inability to perform the work
  • Contract cessation (C): the natural end of a contract, seasonal role, or casual engagement
  • Transfer (T): moving an employee to another payroll system or employer for administrative reasons

4. Income Types Show How Each Payment Is Treated

Each payment is tagged with an income type, such as salary and wages, closely held payees, or working holiday makers. Some payments, including certain termination payments, also need a country code. Your software handles most of this, but the employee setup behind it needs to be right.

Changes in 2026-27 STP Reporting 

Two changes took effect during the 2026-27 financial year, and both affect what your pay events must contain.

Payday Super Adds Qualifying Earnings and Super Liability

Payday Super started on 1 July 2026 and requires employers to pay super for each payday. STP now carries the data the ATO uses to check those payments.

For paydays from 1 July 2026, your STP report must include two year-to-date amounts for each employee:

  • Qualifying earnings (QE): the earnings that attract super guarantee, now the base for the 12% super guarantee rate
  • Super liability: the minimum super guarantee payable, plus any extra super an award or enterprise agreement requires

Some payments are not QE, including fringe benefits and expense reimbursements, and reporting them as QE may create mismatches with super fund data. Once an employee’s earnings reach the maximum contribution base ($270,830 for 2026-27), you can keep reporting that figure for the rest of the year.

The transition rules are set out in the ATO’s STP reporting requirements under Payday Super:

  • Until 30 June 2027, the ATO still accepts ordinary time earnings (OTE) reported with super liability.
  • Once you start reporting QE, OTE reporting is no longer accepted.
  • From 1 July 2027, STP reports without both QE and super liability will be rejected, and penalties may apply.

If your software isn’t updated yet, keep clear records of the super guarantee amount for each payday and start reporting as soon as you can. Not reporting these amounts during 2026-27 increases the risk of ATO compliance action.

Paying super every payday also changes when cash leaves the business, which makes regular cash flow management for small businesses more important than it was under quarterly super.

Award Transport Payments Moved Into Standard Allowance Reporting

The Treasury Laws Amendment (Tax Reform No. 1) Act 2026 received royal assent on 26 June 2026 and removed the special tax rules for award transport payments. For amounts paid on or after 1 October 2026, employers must:

  • withhold tax from these allowances
  • stop identifying them as award transport payments (allowance type AD) in STP
  • report them under the allowance classification that best fits, such as other allowances

The ATO’s guidance on changes to award transport payments sets out two transition methods. The cutover method had to be in place before your first payment on or after 1 October 2026.

The zeroing out method uses an STP update event to move the year-to-date amount into the new classification. It remains available until 31 December 2026, provided you have withheld correctly since 1 October.

The hard stop is 1 July 2027: STP reports that include allowance type AD for payments made on or after that date can’t be lodged. Award-based fares and travel allowances are common in construction and the trades, so employers in those industries should check this item first.

What Stays the Same Under STP Phase 2

Plenty of the routine hasn’t moved:

  • Timing: STP reports are still lodged on or before each payday.
  • Payments: STP reports super and PAYG withholding but doesn’t pay them. Super still goes to funds, and PAYG withholding is still paid through your activity statement.
  • TFN declarations: new employees still complete one, and you keep it on file.
  • Finalisation: the 14 July deadline for arm’s length employees is unchanged.

STP also doesn’t replace your business activity statement (BAS). PAYG withholding is still reported at labels W1 and W2, and those figures should reconcile with your pay events, which is why BAS preparation and PAYG withholding reporting works best when it draws on the same payroll data.

Reporting Options for Micro Employers and Closely Held Payees

The ATO’s concessional reporting options for STP change when you report, not what you owe. Your PAYG withholding and super guarantee obligations stay the same.

Closely held payees. If you have 19 or fewer payees, you can report closely held payees quarterly by your activity statement due date, using either actual payments or a reasonable estimate. Where your circumstances haven’t changed materially since your last finalised year, the ATO generally accepts these year-to-date estimates:

Quarter

Year-to-date estimate

Quarter 1

25% of last year’s reported total

Quarter 2

50% of last year’s reported total

Quarter 3

75% of last year’s reported total

Quarter 4

100% of last year’s reported total

If you estimate, you pay PAYG withholding and super guarantee based on the estimate, then update to actual amounts at finalisation. Underestimating can mean revising your quarter 4 activity statement, and general interest charge may apply.

Only payments subject to PAYG withholding are reported through STP, so the way owners and relatives are paid matters. Wages and directors’ fees are reported, while distributions from a discretionary trust generally sit outside STP, which is one reason family trust accounting and distribution planning deserves a look alongside payroll.

Micro employers. Employers with 1 to 4 employees, excluding closely held payees, may apply for a quarterly reporting concession. Eligibility is narrow: a registered tax or BAS agent must apply and lodge for you, your payroll must be non-computerised, and exceptional circumstances must apply.

Finalisation Deadlines and Fixing STP Errors

Finalisation tells the ATO your reporting for an employee is complete, which marks their income statement as tax-ready in myGov.

Your payees

Finalisation due date

Arm’s length employees

14 July

Closely held payees, where you also have arm’s length employees

30 September

Closely held payees only

The payee’s tax return due date, usually 31 October

For 2026-27, the first full year of Payday Super reporting, finalisation for arm’s length employees is due by 14 July 2027.

Errors need prompt attention. You generally must correct an error within 14 days of finding it, or by your next regular pay event if your pay cycle is longer than 14 days. Corrections for a prior year are due by 14 July after year-end, and you can amend finalised information for up to 5 years.

What Should Small Business Employers Check Now?

A short payroll review now is far easier than unwinding a year of mapping errors at finalisation. Work through these items:

  1. Software readiness: confirm your provider has updated your product for Payday Super and that you’re reporting QE, not OTE.
  2. Pay item mapping: check each pay item against its STP category, especially allowances, overtime, leave loading, and salary sacrifice.
  3. Former award transport allowances: confirm tax has been withheld since 1 October 2026 and the year-to-date amount has moved out of allowance type AD.
  4. Employee records: confirm employment basis and tax treatment reflect each employee’s latest declarations.
  5. Closely held payees: confirm your reporting option and that any quarterly estimate still reflects actual payments.
  6. ATO error messages: clear outstanding STP errors within the 14-day correction window.
  7. Finalisation calendar: diarise 14 July 2027, plus 30 September or 31 October if you have closely held payees.

Pay item mapping is set once and then repeats every pay run, so it’s best reviewed as part of regular bookkeeping and payroll processing in Xero rather than at year-end.

Not Sure Your Pay Runs Are Reporting What You Think?

STP Phase 2 rewards a payroll set-up done properly once. At Coleman Financial Group, we review payroll settings, pay item mapping, and Payday Super reporting as part of our small business accounting services, so your pay runs, BAS, and super stay aligned. If you’d like a second set of eyes on your payroll before the next deadline, we’re happy to talk through your situation.

This article provides general information only and does not take into account your objectives, financial situation, or needs. STP and Payday Super requirements may change, so confirm current ATO guidance or seek professional advice before acting.



Scroll to Top